Добро пожаловать, Гость
Логин: Пароль: Запомнить меня

ТЕМА: 45 Flathead Wheelchair

45 Flathead Wheelchair 1 год 2 мес. назад #833

  • Williamhawk
  • Williamhawk аватар
  • Не в сети
  • Завсегдатай
  • Сообщений: 206
  • Репутация: 0

Was at the Swap Meet outside of Lake Elsinore last week-end , and found a 1967 flathead 750 cc Meter Maid motor, less transmission. Pretty much it's just two heads, two cylinders a crankcase with a giant sprocket sticking out the left side for $200.00. Needs lots of work, but nothing major.

I'm going to de-tune it with a smaller Tillotson, and plug up the exhaust with a huge home made muffler (made from coffee cans) filled with baffles and steel wool. Lind of like a steel-wool air cleaner, but in reverse.

So I figure if I can get the motor down to aroud 12 HP (stock was 1 can mount a nice sounding HD V-Twin under a chair with room to spare. Run the primay chain to a jackshaft with each hub being able to free-wheel when it came time to make a turn. Like the ratchet assy. on a 10 speed's rear gear set.

Should be good for about 2K RPM and 30+ mph if I gear it right.

Obsessive compulsive wheelchair disorder?
Please help.


I didn't find the right solution from the Internet.


Sales Promotional Video
Администратор запретил публиковать записи гостям.
Время создания страницы: 0.187 секунд
Работает на Kunena форум