Добро пожаловать, Гость
Логин: Пароль: Запомнить меня

ТЕМА: Chain too tight to cause shaft bearing damage?

Chain too tight to cause shaft bearing damage? 1 год 3 мес. назад #827

  • Williamhawk
  • Williamhawk аватар
  • Не в сети
  • Завсегдатай
  • Сообщений: 206
  • Репутация: 0

I have 1600 miles on my Ducati Scrambler. It had its 600 mile service at a Ducati dealership and runs great!

I checked my chain at the weekend and noticed that it looked a bit tight. I checked it (it has some really tight spots and really slack spots) and at the tightest spot seemed to be about 3/4 inch or about 20mm at the tightest.

I adjusted it with no issues apart from the little washer on the small adjuster nut went a bit deformed even though I torqued it only to 10 NM per the manual (?) Also 145 NM is a lot of torque on the main wheel-nut!

Now the chain is right in-between the manual's chain guidelines at 26-29mm.

Do you think this would have been tight enough to have caused any shaft bearing damage? Took it to a local Honda dealership to take a quick look before I changed it on sat and the young technician guy who gave it a quick look said it looked a bit slack and then moved to a tight spot and said it looked too tight but didn't think too tight to do any damage, but he didn't sound very confident.

Please help.


I didn't find the right solution from the Internet.


Cryptocurrency Marketing
Администратор запретил публиковать записи гостям.
Время создания страницы: 0.187 секунд
Работает на Kunena форум