Добро пожаловать, Гость
Логин: Пароль: Запомнить меня

ТЕМА: can't get cylinders close on new cv carb and kit i

can't get cylinders close on new cv carb and kit i 1 нед. 5 дн. назад #641

  • Williamhawk
  • Williamhawk аватар
  • Не в сети
  • Новый участник
  • Сообщений: 2
  • Репутация: 0
Hello all,

I just finished new (to me) complete fuel system on my 85 softail. Rebuilt cv carb with full cv performance kit. Carb soaked and cleaned. Cv performance ez just and packing. 46 low 185 high speed jets. Found a cv carb intake with good straight flanges. New throttle cables. New air cleaner and backing plate. Every thing is new or in like new shape from heads to filter. Just did a compression test. Engine hot, throttle wide open, battery charged. 119 front barrel, 121 rear barrel. It's probably higher, used a rented auto zone tester (probably not very accurate). I made each one hold pressure for 45min. Stayed solid. Bike runs great. No coughing through carb, no backfiring through pipes. No popping on deceleration even on long hills. Seems really crisp on throttle wicks. The problem is both plugs are far apart. Front plug looks dry and a little lean. Back plug looks almost wet and black sooty. I have 4 picts of plugs but can't post them it says too large.





I didn't find the right solution from the internet.
References:
bike-talk.com/threads/cant-get-cylinders...d-kit-install.21724/

advertisement examples
Последнее редактирование: 1 нед. 5 дн. назад от Williamhawk.
Администратор запретил публиковать записи гостям.
Время создания страницы: 0.205 секунд
Работает на Kunena форум